It is currently 28 Mar 2024, 17:45


...contact "Reset(AC)" point quickly

For electronic related stuff like module repair, silver epoxy fixes etc.
  • Author
  • Message
Offline
User avatar

your_man_in_Hamburg

Techie

Techie

  • Posts: 121
  • Joined: 12 Jan 2004, 16:55
  • Location: Sweden

...contact "Reset(AC)" point quickly

Post05 Mar 2023, 21:03

Today I opened my Nixon Heat for the first time. There, on the back of the battery clip, was a sticker saying

  1. Replace a new battery
  2. Use metal tweezers to contact "Reset(AC)" point quickly
  3. If it doesn't work repeat step 1 & 2 again

I will not digress and tell you all the things I find amusing or disturbing with this message, but cut directly to my question:

Should the reset point be connected to + or -?

Extra credit:

Why is step 2 necessary? Every other battery powered watch or clock I have experienced up to this point, have started as soon as you put in a new battery.
Offline
User avatar

charger105

Guru

Guru

  • Posts: 867
  • Joined: 02 Mar 2007, 02:11
  • Location: Australia

Re: ...contact "Reset(AC)" point quickly

Post11 Mar 2023, 06:12

I would say connect AC point to the case...presuming it's connected to one side of battery.
When u change a battery, voltage fluctuations/spikes as you put it in and clamp it down can set registers with strange values. I've seen quit a a lot like this...Seikos etc from memory.
Rgds.

Return to Electronical

Who is online

Users browsing this forum: No registered users and 30 guests