This is another project I'm working on.
I have purchased a lot containing three modules, two C-701 and one C-801
all of them non working and in very bad conditions.
So fa,r I have brought back to life two modules, but still I have the following problems :
On the modules :
IMG01009.jpg
the module works bit other then the light (most upper left switch) I cannot get
any function to change. When I push the metal contacts nothing happens, only
the light button works. Since some watches (like Texas Instruments) need
to have the module in the case, I have also put the module back, but nothing.
Since both modules behave in the same way, I believe I'm missing something
quite trivial on both. Contacts are very clean, and I'm sure that by pushing the levers
toward the module the contacts gets in touch. Has ever happened to someone ?
On the glasses :
IMG01006.jpg
Normally the glass and the legend do not get separeted, but with these modules has
happened. Is this normal ? Does anyone know a good source for some spare glasses ??
On the cases :
IMG01005.jpg
Casio's cases are very different from Seiko's one. On all the Casio I have worked on, the back of
the cases tends to deteriorate quite badly. Again, is there any way to recover these or, since are
made of plastic there is no way ?
Thanks again for any hint,
Alberto
You do not have the required permissions to view the files attached to this post.