It is currently 25 Apr 2018, 14:42


LED Identification and advice

  • Author
  • Message
Offline

Pip

Member

Member

  • Posts: 11
  • Joined: 04 Feb 2014, 17:11

LED Identification and advice

Post23 Feb 2018, 11:58

HI all,
I have this in my collection, I’m trying to ID it if possible. I also dn’t Know if the case back is removable or not, or if it’s just the battery hatch that comes off and the movement is supposed to be sealed in.

Any knowledge or advice would be gratefully received.

Phil

Image
Offline
User avatar

767Geoff

Techno Mage

Techno Mage

  • Posts: 507
  • Joined: 05 Feb 2007, 17:58
  • Location: VANCOUVER, B.C.

Re: LED Identification and advice

Post23 Feb 2018, 15:33

Picture of the case back?
Offline

Pip

Member

Member

  • Posts: 11
  • Joined: 04 Feb 2014, 17:11

Re: LED Identification and advice

Post24 Feb 2018, 17:37

Of course! Here we are...
Image

Image
Offline
User avatar

richard_uk

Guru

Guru

  • Posts: 1037
  • Joined: 12 Jul 2004, 16:18

Re: LED Identification and advice

Post24 Feb 2018, 19:56

See where it says open through back :grin1:

I assume where those little triangles are pointing is where you would use a case back knife to pry the back off, you might need a case press to get it back on though.
Offline

Pip

Member

Member

  • Posts: 11
  • Joined: 04 Feb 2014, 17:11

Re: LED Identification and advice

Post24 Feb 2018, 23:49

richard_uk wrote:See where it says open through back :grin1:

I assume where those little triangles are pointing is where you would use a case back knife to pry the back off, you might need a case press to get it back on though.


Thanks Richard, that’s a good tip, I’d not thought about where the arrows were pointing. I’ve tried to open it a few times but probably not from there and I was worried about damaging the case as the force I was using was going up with no success! I will have a go when I return home and have a look at the case under magnification to see if there are any tell tale hollows that look designed for a knife. Luckily I have a case press too.
Will report back in the next few days.
Phil

Return to All other LED watches

Who is online

Users browsing this forum: No registered users and 2 guests